3 weeks ago
16
Buildings, Vol. 14, Pages 1233: Comparison of Performance Analysis Results with Developed Site-Specific Response Spectra and Turkish Seismic Design Code: A Case Study from the SW Türkiye Region
Buildings doi: 10.3390/buildings14051233
Authors: Mehmet Alpyürür Hakan Ulutaş
On 6 February 2023, the Kahramanmaraş earthquakes clearly showed that the elastic spectrum curves in TBEC-2018 are insufficient to represent earthquake behavior. In this study, the effect of using a site-specific spectrum curve instead of the elastic spectrum given in TBEC-2018 on the earthquake safety of a building is investigated. For this purpose, the provinces in southwest Anatolia, Türkiye, which is one of the most tectonically complex regions with frequent seismic events, were selected. In the first stage of the study, spectrum curves were obtained for earthquakes with return periods of 2475, 475, and 72 years for each of the provinces in this region. These spectrum curves were obtained using probabilistic seismic hazard studies that take into account the active faults of the provinces and earthquake activity in both historical and instrumental periods. In the second stage of the study, analytical models of a selected model RC building were created according to each province, and static pushover analyses of these building models were performed both according to the elastic spectrum given in TBEC-2018 and according to the spectrum curve created specifically for the province. The results of the analyses show that the change in the spectrum changes the target displacement level of the buildings, and as a result, the cross-sectional damage zone of the structural elements under the earthquake effect is changed. So much so that using the site-specific instead of the elastic spectrum given in TBEC-2018 changed the damage zone of 43% of the beams and 26.4% of the columns in the İzmir model. The change in the section damage zones changed the performance level of some floors of the models and the performance level of the building. The study revealed the importance of using the most realistic elastic spectrum curves in order to determine the earthquake performance of buildings that is as close as possible to their behavior in a possible earthquake.
