5 months ago
24
Coatings, Vol. 13, Pages 2025: Optimization of the Green Fibre Paper Film Preparation Process Based on Box–Behnken Response Surface Methodology
Coatings doi: 10.3390/coatings13122025
Authors: Xiaoqing Cao Lu Li Fengwei Zhang Linxiong Shi Fangyuan Zhang Xuefeng Song Wuyun Zhao Fei Dai
To improve the utilization rate of flax straw and the clean treatment of livestock manure, an experimental study was conducted on the process and performance of making fibre paper films by mixing cow dung and flax straw fibre. Cow dung and flax straw were used as the main raw materials, and functional additives were not added. The whole technological process of the pretreatment, the beating process, the determination of the beating degree, the basis weight of the paper, papermaking, drying, sample cutting, and the determination and analysis of the related mechanical properties of the film-making materials were studied. In this study, the Box–Behnken experimental design principle in the response surface methodology was adopted, and the effect of each factor on the tensile strength and tear strength of fibre paper film made of mixed fibres was determined using the combined experimental design comprising four factors and three levels centres. The results showed that the optimum technological parameters were as follows: the beating degree of the cow dung fibre was 37 °SR, the beating degree of the flax straw fibre was 85 °SR, the paper basis weight was 80 g/m2, and the addition of flax straw fibre was 65%. At a drying temperature of 80 °C and a drying time of 8 min, under the conditions of the hybrid fibre paper film placed in the laboratory environment (humidity of 30%~40%, temperature of 18 °C) for 24 h, the measured tensile strength was about 8.26 MPa, and the tear strength was about 19.91 N/mm. This study provides a reference that can be used for the further study of fibre paper film.
