Minerals, Vol. 13, Pages 1504: Floatability of Fluorite and Calcite Inhibited by Sodium Hexametaphosphate via Ultrasonic Activation

Minerals, Vol. 13, Pages 1504: Floatability of Fluorite and Calcite Inhibited by Sodium Hexametaphosphate via Ultrasonic Activation

Minerals doi: 10.3390/min13121504

Authors: Zhehui Yang Maolin Li Yingxin Lin Wei Yao Yue Wu Rui Cui

In order to separate fluorite and calcite inhibited in tungsten tailings, the effect and mechanism of using ultrasonic external field activation to separate fluorite and calcite inhibited by sodium hexametaphosphate in a sodium oleate system were investigated. After pretreatment with an ultrasonic external field with a frequency of 40 kHz and sound intensity of 0.56, 0.50 and 0.40 W/cm2, the flotation recovery of calcite could be increased from 16.08% to about 80%, while the flotation recovery of fluorite was only increased from 7.5% to about 20%, with a difference of 60% between the two flotation recoveries, and the larger the sound intensity, the shorter the pretreatment time and the smaller the ultrasonic input energy. The contact angle of the calcite surface increased, sodium oleate adsorption increased, and zeta potential decreased after ultrasonic pretreatment, while the contact angle, sodium oleate adsorption, and zeta potential of fluorite surface were less changed. The results of heat of adsorption and XPS measurements showed that more heat was released from the interaction between sodium hexametaphosphate and fluorite, and the Ca2p peaks on the surface of fluorite were shifted to a greater extent after the interaction, which inferred that the adsorption of fluorite and sodium hexametaphosphate was relatively easier and stronger. It is presumed that the ultrasonic pretreatment can bring the mineral surface to different degrees of desorption according to the adsorption strength of sodium hexametaphosphate, exposing Ca2+ active sites for sodium oleate adsorption, while expanding the floatability difference between fluorite and calcite.