Processes, Vol. 11, Pages 362: Biogas Production from Residues of Industrial Insect Protein Production from Black Soldier Fly Larvae Hermetia ilucens (L.): An Evaluation of Different Insect Frass Samples

Processes, Vol. 11, Pages 362: Biogas Production from Residues of Industrial Insect Protein Production from Black Soldier Fly Larvae Hermetia ilucens (L.): An Evaluation of Different Insect Frass Samples

Processes doi: 10.3390/pr11020362

Authors: Wedwitschka Gallegos Ibanez Reyes Jáquez

Insect biomass shows promise as an alternative animal feedstuff with a low climate effect. Industrial insect rearing generates residual materials, such as feed remains and insect excrements, so-called insect frass, which exhibits a high organic content. Commonly, these residues are utilized as soil amendment. Information on the suitability of these residues for biogas production is rather scarce. The energetic utilization of insect frass as feedstock for anaerobic digestion (AD) would allow for the simultaneous residue material reduction and bioenergy production. Additionally, synergies in heat management could arise using the exhaust heat of the biogas plant in the insect farming process. In laboratory-scale anaerobic digestion trials, the specific methane yield (SMY) of six different insect frass samples from black soldier fly (Hermetia) rearing were tested in batch biochemical methane potential (BMP) tests. Further, semi continuous anaerobic digestion trials on a lab scale using continuously stirred tank reactors (CSTRs) were carried out with Hermetia insect frass from a pilot plant operation in order to determine the digestibility and process stability of the AD process. The BMP results showed SMY values of the different insect frass samples ranging from 201 ± 9 to 287 ± 37 mL/gVS that are similar to those of other animal excrements, such as cow or pig manure already been used as feedstock in agricultural biogas plants. Results of the semi-continuous digestion of insect frass from the pilot plant operation showed a SMY value of 167 ± 15 mL/gVS, suggesting no process-inhibiting effect caused by the feed material. Although, the high nitrogen content must be taken into account for stable AD performance.